| View previous topic :: View next topic |
| Author |
Message |
pkang0202
Joined: 09 Mar 2007
|
 Posted: Mon Jun 11, 2007 12:38 am Post subject: Replacement/Repair Power adapters? |
 |
|
I got an 120V electric shaver that got plugged into a 220V socket. The shaver works fine, but the power adapter used to charge it doesn't work anymore. Its a Philips/Norelco. Anyone where I could find a place to repair/replace the power plug?
As long as the Output is: DC 3.7V 95mA, anything that meets that spec should work right? |
|
| Back to top |
|
 |
ttompatz
Joined: 05 Sep 2005
Location: Kwangju, South Korea
|
| Posted: Mon Jun 11, 2007 12:51 am Post subject: Re: Replacement/Repair Power adapters? |
|
|
| pkang0202 wrote: |
I got an 120V electric shaver that got plugged into a 220V socket. The shaver works fine, but the power adapter used to charge it doesn't work anymore. Its a Philips/Norelco. Anyone where I could find a place to repair/replace the power plug?
As long as the Output is: DC 3.7V 95mA, anything that meets that spec should work right? |
Yes, anything that meets that output will be fine. In fact, the mA can be higher (but not lower) and as long as the V is close (+-10%) you should be fine.
It sounds like the rechargable pack is a 3-cell DC pack at 3.75V so you can accept inputs up to about 4.5v. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
