| View previous topic :: View next topic |
| Author |
Message |
pkang0202
Joined: 09 Mar 2007
|
 Posted: Wed Mar 25, 2009 6:58 am Post subject: Programming Samsung Pavv remote |
 |
|
| Anyone know how to program the Pavv remote? I want to use it to control my DVD player. |
|
| Back to top |
|
 |
sojukettle
Joined: 23 Aug 2005
Location: Not there, HERE!
|
| Posted: Thu Mar 26, 2009 2:57 pm Post subject: |
|
|
Setting Up the Remote to Operate Your DVD
1 Turn off your DVD.
2 Press the DVD button on your TV�s remote control.
3 Press the SET button on your TV�s remote control.
4 Using the number buttons on your remote control, enter three digits of the DVD code for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a �0�. (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of DVD. If no other codes are listed, try each code, 000 through 141
(SET is the small button on the left [the other is RESET]under the SRS button on the bottom row on your controller)
What is your brand of DVD? and I'll post the code/s.
sk |
|
| Back to top |
|
|
pkang0202
Joined: 09 Mar 2007
|
| Posted: Thu Mar 26, 2009 10:01 pm Post subject: |
|
|
I found the codes on Samsung's website. took a while to navigate but found it eventaully. Thanks a lot!
Now, if only I could program my WD HD TV to work with the remote... |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
