View previous topic :: View next topic |
Author |
Message |
bcraig
Joined: 01 Oct 2009 Location: Minnesota
|
Posted: Fri Dec 04, 2009 9:14 am Post subject: Korean Plug Adapters |
|
|
I am going to South Korea next month and have questions about electronics:
I have the most recent MacBook Pro, what do I need to safely plug it in in South Korea?
I hear South Korea uses a two prong plug ... I have some US to Euro (two prong) adapters ... are these compatible in South Korea?
If I bring a hairdryer and curling iron, do I need a converter as well as an adapter?
Let me know! Thanks! |
|
Back to top |
|
 |
BigLarry
Joined: 09 Sep 2009 Location: Anywhere there is wine.
|
Posted: Fri Dec 04, 2009 11:44 pm Post subject: |
|
|
Your Macbook should be fine, most models are designed to adapt to different voltages. Though you should check your instruction manual to see if it can cope with 220.
Yep, the European two prong convertors work fine over here with no problems.
You may have problems with the curling irons and hairdryer. It'll be easier just to buy new ones when you get to Korea and save some space in your bags. |
|
Back to top |
|
 |
seonsengnimble
Joined: 02 Jun 2009 Location: taking a ride on the magic English bus
|
Posted: Sat Dec 05, 2009 3:33 am Post subject: |
|
|
The European plug converters work, but they're a slightly different size, so the plug will be a bit loose. You can get a converter from any hardware store for about 500won. |
|
Back to top |
|
 |
TNizzle
Joined: 19 Nov 2009 Location: Seoul via: Indiana
|
Posted: Thu Dec 10, 2009 6:48 am Post subject: |
|
|
You can get converters at an Alpha store here in Korea for 500won |
|
Back to top |
|
 |
broken76
Joined: 27 Jan 2008
|
Posted: Thu Dec 10, 2009 11:31 pm Post subject: |
|
|
Your laptop should be fine, you'll just need the prong converter. For things that aren't supposed to be used internationally you'll need a voltage converter. Whatever the product is it should have a label with the voltages on it. |
|
Back to top |
|
 |
Rusty Shackleford
Joined: 08 May 2008
|
Posted: Fri Dec 11, 2009 1:18 am Post subject: |
|
|
An easier way for laptops is to swap out the cord. All this entails is pulling the cord out of the little brick and swapping in a Korean version. I used an old printer cable for mine. I had one of the adapters but it was slightly too small and you had to jiggle it around. This caused multiple arcs and fried the prongs. That has to be a fire hazard. |
|
Back to top |
|
 |
|